• Control Screen: Your session data hub showing current temperature, set temperature, and session time remaining 
• Precision Temperature: Swipe up/down to set your exact temperature 
• Smart Paths™: Swipe up/down to choose your temperature path 
• Settings Menu: Adjust brightness, lights, theme, session time, temperature units (F°/C°), Bluetooth, and access tutorials 

Swipe the touchscreen to browse between different modes and settings. Tap once to confirm your selection. Swipe right to go back.

Yes! Once the heater has reached temperature and the session starts, click the Command Button once to add 20 seconds. You can add up to 60secondstotal during a session.

The DaVinci EQ is a premium electric dab device designed for precise temperature control, clean vapor production, and modular concentrate use. It delivers the benefits of an E Rig with consistent heat, no torch, and smooth water‑filtered vapor all in a compact, touchscreen‑controlled system

Press and hold the Command Button for 2 seconds to turn on the heater. The E Rig device will vibrate. Once the heater reaches your set temperature, the LED lights turn green. A 45-second session will automatically start.

Fill the bubbler no more than halfway up. Always remove the bubbler from the base before filling to avoid water damage. Use clean or distilled water for best performance and replace regularly.

Connect the provided USB-C cable to the port on the side of the base. The EQ charges at 5V and up to 2A, taking approximately 2-3 hours for a full charge.

The EQ offers two modes: 

• Precision Temperature Mode: Set any temperature from 450-650°F (232-343°C). The temperature remains constant throughout your session for optimal flavor consistency. 

The default temperature is 550°F (288°C) or your last set precision temperature. 

• Smart Path™ Mode:  

 Choose from 4 customizable paths. Default Smart Paths are: 

• Atomic: 600-620°F (316-327°C) 
• Clouds: 560-580°F (293-394°C) 
• Flavor: 520-540°F (271-282°C) 
• Terpene: 480-500°F (249-260°C) 

 You can customize the paths, duration and name under the settings screen.  

You have two options: 

• Cold Start: Load concentrates into the quartz crucible before turning on the heater for more flavorful, smoother vapor as terpenes are individually expressed 
• Hot Start: Load concentrates once the crucible is hot for higher strength vapor 

Use the included loading tool and avoid overloading the crucible.