Here are helpful tips we recommend to increase your vapor density:
◦ Pack your material in the ceramic bowl firmly and draw slowly.
◦ Raise your temperature.
◦ Adjust the Ceramic Pearl when not packing a full bowl

Minimum
Temperature: 32ºF / 0ºC 

Maximum Temperature: 430ºF / 221ºC

IQ3's heat-up time varies between 30-60 seconds depending on your set temperature or Smart Path.

Smart Paths are preset temperature experiences that gradually increase the temperature over an 8-minute session. Cycle through Smart Paths by pressing the up or down buttons.

Smart Path 1
– FLAVOR

 Use Smart Path 1 to spark creativity and enjoy the flavors of your herb. This temperature range is the perfect starting point for users who are new to the DaVinci experience and prefer the journey. 

Smart Path 2
– MIND

Elevate into Smart Path 2 to stay awake and active while gently enlightening your spirit. This temperature range is ideal for the casual user who is ready to socialize and have a good time. 

Smart Path 3
– BODY

Explore Smart Path 3 to engulf yourself in a full-body sensation. This temperature range is optimal for a more frequent user who is ready to relax the body and free their mind. 

Smart Path 4
– REST

Discover Smart Path 4 to release stress or pain and allow intense sedation to captivate you. This temperature range is the ultimate choice for the expert user.

Dosage Control offers precise cannabis management. IQ3’s dosage algorithm considers potency and quantity; dosage varies with temperature, draw length, and pauses. Draws last 12 seconds, and calculations are based on user input. *Actual measurements may vary.

(1) On the app, follow the prompts to connect your IQ3. (2) Input your strain information & amount of dry herb in your oven. (3) Add a maximum dose per session.

Your IQ3 will alert you when you’ve reached your desired dose within the app and on the IQ3’s LED screen.

1. Activate: Click the control button 2x within the first 2 minutes of turning on your IQ3. 

2. Select Your Session: 

Freshly Packed Oven — Click the control button 1x to confirm “NEW.” 

2nd Oven — If your oven is in its second session, use the navigation buttons to select “2ND” and click the control button 1x to confirm. 

3. THC Potency: The LED display will flash “THC” 1x, then begin flashing a numerical value. 

New to On Device Dosage — If this is your first time setting up On Device Dosage, the preset value will be 20. 

Previously used On Device Dosage — If you have previously used On Device Dosage, your IQ3 will remember your last session’s THC levels.

Use the navigation buttons to select your THC percentage level and click the control button 1x to confirm. If the THC value is “0”, the device will not calculate THC.

*High concentrate THC settings only calculate for 1 run while dry herb calculates for 2.

4. CBD Potency: The LED display will flash "CBD" 1x, then flash a numerical value. 

New to On Device Dosage — If this is your first time setting up On Device Dosage, the preset value will be 0.0.

Previously used On Device Dosage — If you have previously used On Device Dosage, your IQ3 will remember your last session’s CBD levels.

Use the navigation buttons to select your CBD percentage level
(if none or unknown, select 0.0) and click the control button 1x to confirm. If the CBD potency value is 0.0 the device will not calculate CBD.

5. Amount Loaded: The LED display will flash an oven.

THC > 50 — If you have chosen a THC potency GREATER than 50, a small oven will be displayed to indicate use of concentrate. 

THC < 50 — If you have chosen a THC potency LOWER than 50, a large oven will be displayed to indicate use of dry herb.

Use the navigation buttons to select the loaded amount in your oven and click the control button 1x to confirm.

The IQ3 is equipped with a 21700 removable battery, which provides 2 charging methods: 

• On-Device Charging
• External Battery Charging

Helpful Tip: For safe storage, always remove your battery when your IQ3 is not in use. This will help avoid battery damage and/or corrosion.

IQ3's charge time is approximately 3 hours.

Yes, the IQ3 is equipped with pass through charging, so you can use it while charging. Pass-through charging may be paused to protect the device when overheating is detected.

With a replaceable battery, you have the option of putting a new battery in while the low battery recharges.

The IQ3 is powered by a 4000 mAh - 21700 removable Lithium-Ion battery.

The battery lasts up to 90 minutes but will vary by the desired temperature preferences.
Helpful Tips:
◦ Disconnecting Bluetooth when not in use will save battery life. Bluetooth will automatically disconnect from the device when less than 10% of the battery capacity remains.
◦ Your IQ3 will vibrate when 10% battery remains.

5 Lights = ~100%
Battery

3 Lights = ~50%
Battery

1 Light = ~10%
Battery *The
device will vibrate when 10% battery remains

To keep your IQ3 working optimally, we recommend regularly cleaning parts that encounter vapor using 70%+ isopropyl alcohol and/or water.

For Non-Removable Parts: Use a cotton swab dipped in 70%+ isopropyl alcohol to clean.

For Removable Parts: Soak the Mouthpiece, Cool Core, Flavor Chamber & its cap, and the 10mm Water Tool Adapter. Wipe the silicone Mouthpiece Gasket and the
silicone Flavor Chamber Cap O-ring. 

Ceramic parts may be soaked overnight; do not soak silicone parts for prolonged periods of time. Rinse removable parts with water and allow them to dry thoroughly.

Do not submerge the device in liquid or use abrasive materials to clean the device, oven, or vapor path, as damage may occur.

A "Burn-Off" cycle is the process of removing residual odors, chemicals, and any materials left in your oven after cleaning. You should perform a burn-off cycle anytime you want to remove residual odors and loosen cleaning material, especially after thoroughly cleaning your IQ3.

The mouthpiece and 10mm Water Tool Adapter are crafted from Zirconia ceramic, renowned for its durability and ability to provide a cooling effect when vaping.

The flavor chamber is crafted from black polished zirconia ceramic. This multifunctional chamber not only serves as an advanced cooling unit for vapor but also doubles
as a secondary vaporization chamber for herbs.

It's all in the name, my friend. The Dosage Pods are made of 304 stainless steel.

No, IQ3's ceramic bowl is not removable.

DaVinci warrants the IQ3 (not its accessories) against defects in materials and workmanship under normal use for a period of ten (10) years from the date of retail purchase by the original end-user purchaser with proof of purchase. If a physical defect arises and a claim is received within the warranty period, at its option and to the extent permitted by law, DaVinci will either (1) Repair the product defect or (2) Exchange the product with a product that is new or is functionally equivalent. The customer is responsible for bearing the cost of freight to receive warranty support.

The limited warranty does not apply to normal performance degradation of materials, wear and tear of hinges and mouthpieces, or neglect to adhere to cleaning instructions. Don't hesitate to contact the DaVinci support team for customer service needs. For expedited service, register your product and sign up for DaVinci’s VIP Customer Service Program.

For full warranty details, visit - davincivaporizer.com/warranty-information

To register your IQ3, we ask you to submit a Product Registration form. To do so, please visit -https://davincivaporizer.com/pages/product-registration